Safety Tip: Working with Wet Concrete

Concrete is one of the most widely used construction materials, commonly found on both residential and commercial construction sites. But just because it’s a common material doesn’t mean it can be taken lightly.

In fact, concrete can be hazardous in all forms: powder, liquid and solid. Wet cement (an ingredient in concrete) is caustic, abrasive and drying. Exposure to wet concrete can result in skin irritation or even first-, second- or third-degree chemical burns. Other common hazards include skin and eye irritation. Here’s a collection of tips for safely working with wet concrete:

– Wear appropriate PPE such as tall rubber boots, pants, waterproof gloves and long-sleeved shirts.
– If concrete contacts your skin, immediately wash it off with clean water and replace any wet clothing or PPE.
– Wear eye protection with side shields, or safety goggles. Eyes can be seriously injured by splashing concrete.
– Ground all electric tools and use with care. Wet concrete can conduct electricity.
– Be aware of pinch points when raising or lowering concrete chutes.
– Protect your back. Place wet concrete via chute, wheelbarrow or pump, as close to the work area as possible. Concrete should be pushed, not lifted, into place.
– Use waterproof knee pads or a dry board when kneeling to place or finish concrete.

Wet Concrete First Aid:

– Workers may not experience acute symptoms right away if wet concrete touches their skin. If a burning sensation continues or worsens after flushing the area with water, seek medical attention.
– If wet concrete splashes the eyes, flush continuously with clean water for at least 15 minutes and then go to the hospital.

Learn more about concrete safety with these links

Eye PPE Safety Signs

The eyes are fragile organs, and require protection in many environments, and working with concrete is no exception. Concrete splashing into the eyes can seriously injure them, so wearing appropriate eye-wear Personal Protective Equipment can make all the difference.