5S Store
SafetyCal
Safety Poster

Stop Engine

1 - 44 of 44 Signs
Grid List
Signs Ranked by: Popularity |  Language |  Color |  A-Z

SELF SERVICE ISLAND NO SMOKING STOP ENGINE

NHEP-16576
Quick add

SELF SERVICE ISLAND NO SMOKING STOP ENGINE

NHE-16576
Quick add

SELF SERVICE STOP ENGINES NO GAS IN GLASS OR UNAPPROVED CONTAINERS

NHE-33552_WRSTR
Quick add

SELF SERVICE STOP ENGINES NO GAS IN GLASS OR UNAPPROVED CONTAINERS

ONE-33552
Quick add

Self service Stop engines No gas in glass or unapproved containers

ANE-33552
Quick add

SELF SERVICE STOP ENGINES NO GAS IN GLASS OR UNAPPROVED CONTAINERS

NHEP-33552_WRSTR
Quick add

SELF SERVICE STOP ENGINES NO GAS IN GLASS OR UNAPPROVED CONTAINERS

ONEP-33552
Quick add

Flying objects and rotating parts can cause injury or death Stay at least 10 feet away from machinery Stop engine before cleaning or servicing Keep all guards in place

AWEP-16789
Quick add

LOAD RACK PROCEDURES NOTE: PROPER PPE MUST BE WORN AT ALL TIMES 1. STOP ENGINES 2. BLOCK WHEELS 3. GROUND TRAILER 4. CONNECT LOAD LINES 5. FOLLOW COMPANY LOADING PROCEDURES 6. CHECK FOR LEAKS 7. WHEN FINISHED DISCONNECT HOSES AND GROUND CABLE 8. COMPLETE WRITTEN DOCUMENTATION OF LOAD 9. REMOVE WHEEL BLOCKS AND DRIVE SLOWLY OUT OF FACILITY

NHEP-36143
Quick add

Load rack procedures Note: Proper PPE must be worn at all times 1. Stop engines 2. Block wheels 3. Ground trailer 4. Connect load lines 5. Follow company loading procedures 6. Check for leaks 7. When finished disconnect hoses and ground cable 8. Complete written documentation of load 9. Remove wheel blocks and drive slowly out of facility

ANEP-36143
Quick add

LOADER SAFETY Know all operation, warning and safety instruction in the operator's manual before operating the loader. 1. Operate loader only from the operator's seat. 2. Carry bucket low during transport for visibility and to avoid overturns. 3. Use wheel ballast and/or rear weight for stability as recommended in the operator's manual. 4. When parking or servicing unit, lower the bucket to the ground, stop engine, and set the parking brake to avoid tractor movement. Failure to follow any of the instruction above can cause serious injury to the operator or other persons in the area. (Replacement manuals are available from your dealer.)

AWE-14500
Quick add

LOADER SAFETY Know all operation, warning and safety instruction in the operator's manual before operating the loader. 1. Operate loader only from the operator's seat. 2. Carry bucket low during transport for visibility and to avoid overturns. 3. Use wheel ballast and/or rear weight for stability as recommended in the operator's manual. 4. When parking or servicing unit, lower the bucket to the ground, stop engine, and set the parking brake to avoid tractor movement. Failure to follow any of the instruction above can cause serious injury to the operator or other persons in the area. (Replacement manuals are available from your dealer.) - SEGURIDAD DEL CARGADOR Revise todas las instrucciones de operación, advertencias e instrucciones de seguridad en el Manual del Operador antes de operar el cargador. 1. Opere el cargador sólo desde el asiento del operador. 2. Lleve el cubo en una posición baja durante el transporte para facilitar la visibilidad y evitar las volcaduras. 3. Utilice un lastre para ruedas y/o peso posterior para la estabilidad según se recomienda en el Manual del Operador. 4. Cuando estacione o dé servicio a la unidad, baje el cubo hacia el terreno, apague el motor y coloque el freno de estacionamiento para evitar el movimiento del tractor. No seguir alguna de las instrucciones anteriores puede producir una lesión grave al operador o a otras personas en el área. (Su representante de ventas tiene disponibles manuales de reemplazo.)

AWB-14500
Quick add

Self service Stop engines No gas in glass or unapproved containers

ANEP-33552
Quick add

SELF SERVICE STOP ENGINES NO GAS IN GLASS OR UNAPPROVED CONTAINERS

NHE-33552
Quick add

SELF SERVICE STOP ENGINES NO GAS IN GLASS OR UNAPPROVED CONTAINERS

NHEP-33552
Quick add

FLYING OBJECTS AND ROTATING PARTS CAN CAUSE INJURY OR DEATH STAY AT LEAST 10 FEET AWAY FROM MACHINERY STOP ENGINE BEFORE CLEANING OR SERVICING KEEP ALL GUARDS IN PLACE

OWEP-16789
Quick add

FLYING OBJECTS AND ROTATING PARTS CAN CAUSE INJURY OR DEATH STAY AT LEAST 10 FEET AWAY FROM MACHINERY STOP ENGINE BEFORE CLEANING OR SERVICING KEEP ALL GUARDS IN PLACE

NHEP-16789
Quick add

Load rack procedures Note: Proper PPE must be worn at all times 1. Stop engines 2. Block wheels 3. Ground trailer 4. Connect load lines 5. Follow company loading procedures 6. Check for leaks 7. When finished disconnect hoses and ground cable 8. Complete written documentation of load 9. Remove wheel blocks and drive slowly out of facility

ANE-36143
Quick add

LOAD RACK PROCEDURES NOTE: PROPER PPE MUST BE WORN AT ALL TIMES 1. STOP ENGINES 2. BLOCK WHEELS 3. GROUND TRAILER 4. CONNECT LOAD LINES 5. FOLLOW COMPANY LOADING PROCEDURES 6. CHECK FOR LEAKS 7. WHEN FINISHED DISCONNECT HOSES AND GROUND CABLE 8. COMPLETE WRITTEN DOCUMENTATION OF LOAD 9. REMOVE WHEEL BLOCKS AND DRIVE SLOWLY OUT OF FACILITY

NHE-36143
Quick add

LOAD RACK PROCEDURES NOTE: PROPER PPE MUST BE WORN AT ALL TIMES 1. STOP ENGINES 2. BLOCK WHEELS 3. GROUND TRAILER 4. CONNECT LOAD LINES 5. FOLLOW COMPANY LOADING PROCEDURES 6. CHECK FOR LEAKS 7. WHEN FINISHED DISCONNECT HOSES AND GROUND CABLE 8. COMPLETE WRITTEN DOCUMENTATION OF LOAD 9. REMOVE WHEEL BLOCKS AND DRIVE SLOWLY OUT OF FACILITY

NHE-36143_WBLUSTR
Quick add

LOAD RACK PROCEDURES NOTE: PROPER PPE MUST BE WORN AT ALL TIMES 1. STOP ENGINES 2. BLOCK WHEELS 3. GROUND TRAILER 4. CONNECT LOAD LINES 5. FOLLOW COMPANY LOADING PROCEDURES 6. CHECK FOR LEAKS 7. WHEN FINISHED DISCONNECT HOSES AND GROUND CABLE 8. COMPLETE WRITTEN DOCUMENTATION OF LOAD 9. REMOVE WHEEL BLOCKS AND DRIVE SLOWLY OUT OF FACILITY

NHEP-36143_WBLUSTR
Quick add

LOAD RACK PROCEDURES NOTE: PROPER PPE MUST BE WORN AT ALL TIMES 1. STOP ENGINES 2. BLOCK WHEELS 3. GROUND TRAILER 4. CONNECT LOAD LINES 5. FOLLOW COMPANY LOADING PROCEDURES 6. CHECK FOR LEAKS 7. WHEN FINISHED DISCONNECT HOSES AND GROUND CABLE 8. COMPLETE WRITTEN DOCUMENTATION OF LOAD 9. REMOVE WHEEL BLOCKS AND DRIVE SLOWLY OUT OF FACILITY

ONE-36143
Quick add

LOAD RACK PROCEDURES NOTE: PROPER PPE MUST BE WORN AT ALL TIMES 1. STOP ENGINES 2. BLOCK WHEELS 3. GROUND TRAILER 4. CONNECT LOAD LINES 5. FOLLOW COMPANY LOADING PROCEDURES 6. CHECK FOR LEAKS 7. WHEN FINISHED DISCONNECT HOSES AND GROUND CABLE 8. COMPLETE WRITTEN DOCUMENTATION OF LOAD 9. REMOVE WHEEL BLOCKS AND DRIVE SLOWLY OUT OF FACILITY

ONEP-36143
Quick add

STOP MACHINERY TO CLEAN, OIL OR REPAIR

ODE-5900-R
Quick add

STOP AHEAD

NHE-17519
Quick add

BE PREPARED TO STOP

NHE-17541
Quick add

NO PARKING BUS STOP

PKE-20060
Quick add

STOP machinery to clean, oil or repair - DETENGA las máquinas para realizar trabajos de limpieza, lubricación o reparación

ACB-5900-R
Quick add

STOP MACHINERY TO CLEAN, OIL OR REPAIR - DETENGA LAS MÁQUINAS PARA REALIZAR TRABAJOS DE LIMPIEZA, LUBRICACIÓN O REPARACIÓN

ODB-5900-R
Quick add

STOP MACHINERY TO CLEAN, OIL OR REPAIR - DETENGA LAS MÁQUINAS PARA REALIZAR TRABAJOS DE LIMPIEZA, LUBRICACIÓN O REPARACIÓN

OCB-5900-R
Quick add

NO PARKING BUS STOP [ arrow both directions ]

PKE-20065
Quick add

NO PARKING BUS STOP [ arrow left ]

PKE-20545
Quick add

NO PARKING BUS STOP [ arrow right ]

PKE-20550
Quick add

KEEP HANDS AWAY UNTIL CYLINDER STOPS TURNING - MANTENGA LAS MANOS ALEJADAS HASTA QUE EL CILINDRO PARE DE GIRAR

ODB-8213
Quick add

CODE OF MINE SIGNALS 1 BELL HOIST 1 BELL STOP (IF IN MOTION) 2 BELLS LOWER MEN 3 BELLS HOIST MEN 4 BELLS BLASTING SIGNAL ENGINEER MUST ANSWER BY RAISING CAGE OR BUCKET A FEW FEET AND LETTING IT BACK SLOWLY THEN 1 BELL HOIST MEN AWAY FROM BLAST 5 BELLS STEAM ON 6 BELLS STEAM OFF 7 BELLS AIR ON 8 BELLS AIR OFF 3-2-2 DOWN DRILLS 3-2-3 SEND DOWN PICK 9 BELLS DANGER SIGNAL (CASE OF FIRE OR OTHER DANGER) THEN RING NUMBER OF STATION WHERE DANGER EXISTS NO PERSON SHALL RING ANY SIGNAL BELL EXCEPT THE STATION TENDER EXCEPT IN CASE OF DANGER OR WHEN THE MAIN SHAFT IS BEING SUNK ENGINEERS MUST SLOW UP WHEN PASSING STATIONS WHEN MEN ARE ON THE CAGE

NHEP-19780
Quick add

CODE OF MINE SIGNALS 1 BELL HOIST 1 BELL STOP (IF IN MOTION) 2 BELLS LOWER MEN 3 BELLS HOIST MEN 4 BELLS BLASTING SIGNAL ENGINEER MUST ANSWER BY RAISING CAGE OR BUCKET A FEW FEET AND LETTING IT BACK SLOWLY THEN 1 BELL HOIST MEN AWAY FROM BLAST 5 BELLS STEAM ON 6 BELLS STEAM OFF 7 BELLS AIR ON 8 BELLS AIR OFF 3-2-2 DOWN DRILLS 3-2-3 SEND DOWN PICK 9 BELLS DANGER SIGNAL (CASE OF FIRE OR OTHER DANGER) THEN RING NUMBER OF STATION WHERE DANGER EXISTS NO PERSON SHALL RING ANY SIGNAL BELL EXCEPT THE STATION TENDER EXCEPT IN CASE OF DANGER OR WHEN THE MAIN SHAFT IS BEING SUNK ENGINEERS MUST SLOW UP WHEN PASSING STATIONS WHEN MEN ARE ON THE CAGE

NHE-19780
Quick add

Code of Mine Signals 1 Bell Hoist 1 Bell stop if in motion 2 Bells Lower Men 3 Bells Hoist Men 4 Bells Blasting Signal; Engineer must answer by raising cage or bucket a few feet and letting it back slowly then 1 Bell hoist men away from blast 5 Bells Steam on 6 Bells Steam off 7 Bells air on 8 Bells air off 3-2-2 Down Drills 3-2-3 Send Down Pick 9 Bells Danger Signal (Case of fire or other danger) Then ring number of station where danger exists No person shall ring any signal bell except the station tender except in case of danger or when the main shaft is being sunk Engineers must slow up when passing stations when men are on the cage

ASIE-32794
Quick add

CODE OF MINE SIGNALS 1 BELL HOIST 1 BELL STOP IF IN MOTION 2 BELLS LOWER MEN 3 BELLS HOIST MEN 4 BELLS BLASTING SIGNAL ENGINEER MUST ANSWER BY RAISING CAGE OR BASKET A FEW FEET AND LETTING IT BACK SLOWLY THEN 1 BELL HOIST MEN AWAY FROM BLAST 5 BELLS STEAM ON 6 BELLS STEAM OFF 7 BELLS AIR ON 8 BELLS AIR OFF 3-2-2 DOWN DRILLS 3-2-3 SEND DOWN PICK 9 BELLS DANGER SIGNAL (CASE OF FIRE OR OTHER DANGER) THEN RING NUMBER OF STATION WHERE DANGER EXISTS NO PERSON SHALL RING ANY SIGNAL BELL EXCEPT THE STATION TENDER EXCEPT IN CASE OF DANGER OR WHEN THE MAIN SHAFT IS BEING SUNK ENGINEERS MUST SLOW UP WHEN PASSING STATIONS WHEN MEN ARE ON THE CAGE

OSIE-32794
Quick add

GAS SHUTOFF VALVE - VÁLVULA DE CORTE DE GAS

NHB-13841Proj
Quick add

NO SMOKING PURSUANT TO STATE STATUTE 101.123 WISCONSIN ACT 12 FOR MORE INFORMATION VISIT www.dhs.wisconsin.gov/tobacco

NHE-10742-Wisconsin
Quick add

NO SMOKING FOR MORE INFORMATION OR TO REGISTER A COMPLAINT CALL 877-633-7331 OR VISIT www.smokefree.ne.gov

NHE-9998-Nebraska
Quick add

NO SMOKING FOR MORE INFORMATION CALL 1-866-59-SMOKE OR VISIT www.michigan.gov/smokefreelaw

NHE-10666-Michigan
Quick add

Code of Mine Signals 1 Bell Hoist 1 Bell stop if in motion 2 Bells Lower Men 3 Bells Hoist Men 4 Bells Blasting Signal; Engineer must answer by raising cage or bucket a few feet and letting it back slowly then 1 Bell hoist men away from blast 5 Bells Steam on 6 Bells Steam off 7 Bells air on 8 Bells air off 3-2-2 Down Drills 3-2-3 Send Down Pick 9 Bells Danger Signal (Case of fire or other danger) Then ring number of station where danger exists No person shall ring any signal bell except the station tender except in case of danger or when the main shaft is being sunk Engineers must slow up when passing stations when men are on the cage

ASIEP-32794
Quick add

CODE OF MINE SIGNALS 1 BELL HOIST 1 BELL STOP IF IN MOTION 2 BELLS LOWER MEN 3 BELLS HOIST MEN 4 BELLS BLASTING SIGNAL ENGINEER MUST ANSWER BY RAISING CAGE OR BASKET A FEW FEET AND LETTING IT BACK SLOWLY THEN 1 BELL HOIST MEN AWAY FROM BLAST 5 BELLS STEAM ON 6 BELLS STEAM OFF 7 BELLS AIR ON 8 BELLS AIR OFF 3-2-2 DOWN DRILLS 3-2-3 SEND DOWN PICK 9 BELLS DANGER SIGNAL (CASE OF FIRE OR OTHER DANGER) THEN RING NUMBER OF STATION WHERE DANGER EXISTS NO PERSON SHALL RING ANY SIGNAL BELL EXCEPT THE STATION TENDER EXCEPT IN CASE OF DANGER OR WHEN THE MAIN SHAFT IS BEING SUNK ENGINEERS MUST SLOW UP WHEN PASSING STATIONS WHEN MEN ARE ON THE CAGE

OSIEP-32794
Quick add

Don't see what you need?

Contact our live, US-based sales team at (800) 578-1245 or by e-mail.