Fast & accurate
delivery
Hello! Sign in for
Account & orders
0
Cart

Open / Closed / Hours, Machine Safety, warning

1 - 48 of 277 Signs
Grid List
Signs Ranked by: Popularity |  Language |  Color |  A-Z

Carbon dioxide gas can cause injury or death. Actuation of this device causes carbon dioxide to discharge. Before actuating, be sure personnel are clear of the area.

AWE-43054
Quick add

Warning Electrical hazard terminals on both line and load sides may be energized in open position

AWE-30124
Quick add

Rotating shaft hazard Keep body, hands, hair, clothes, away rotating parts will injure or kill

AWE-32818
Quick add

KEEP GUARDS IN PLACE

OWE-4080
Quick add

SAW BLADE PRESENT DISCONNECT POWER AND LOCK OUT BEFORE SERVICING OR MAKING ADJUSTMENTS

OWE-32823
Quick add

LAS CINTAS EN MOVIMIENTO PUEDEN APLASTAR Y DESMEMBRAR NO UTILIZAR SIN LOS PROTECTORES EN SU LUGAR

OWS-4530
Quick add

Risk of electrical shock Can cause injury or death Disconnect all remote electrical power supplies before servicing

AWE-30083
Quick add

Foot pinch point Keep back

AWE-9490
Quick add

DO NOT OPERATE WITHOUT GUARDS - NO UTILIZAR SIN PROTECTORES

OWB-2390
Quick add

KEEP HANDS AND BODY CLEAR OF MOVING PARTS

OWEP-50122
Quick add

Prevent serious injury Keep hands clear of moving machinery

AWEP-28061
Quick add

CRUSH HAZARD STAY CLEAR OF THIS AREA DURING OPERATION - RIESGO DE APLASTAMIENTO MANTÁNGASE ALEJADO DE ESTA ÁREA DURANTE EL FUNCIONAMIENTO

OWB-9491
Quick add

YOU MUST BE AT LEAST 18 YEARS OLD TO OPERATE EQUIPMENT

OWE-14864
Quick add

Pinch point Never reach into moving machinery

AWE-32874
Quick add

Saw blade present Disconnect power and lock out before servicing or making adjustments

AWE-32823
Quick add

Rotating parts Keep away

AWE-32817
Quick add

PRESSURIZED VESSEL

OWE-32811
Quick add

Pressurized vessel

AWE-32811
Quick add

Moving belts can crush and dismember Do not operate without guards in place

AWE-4530
Quick add

PINCH POINT NEVER REACH INTO MOVING MACHINERY

OWE-32874
Quick add

CRANE PRE-USE INSPECTION CHECKLIST HOIST LIMIT CONTROL SWITCHES FOR PROPER OPERATION WIRE ROPE CONDITION TROLLEY FOR PROPER OPERATION BRIDGE FOR PROPER OPERATION C-HOOK CONDITION LOAD BLOCK HOOK AND LATCH CONDITION RADIO FOR PROPER OPERATION FLUID LEAKS LOOSE OR HANGING COMPONENTS WARNING DEVICES FOR PROPER OPERATION

OWE-28304
Quick add

SKID LOADER WORK AREA ENTER WITH CAUTION

OWE-32825
Quick add

COMPRESSOR STARTS AUTOMATICALLY

OWE-7970
Quick add

Energized equipment

AWE-30012
Quick add

Flying objects and rotating parts can cause injury or death

AWEP-16788
Quick add

FLYING OBJECTS AND ROTATING PARTS CAN CAUSE INJURY OR DEATH

OWE-16788
Quick add

Keep clear when in use

AWE-50121
Quick add

Crane pre-use inspection checklist Hoist limit control switches for proper operation Wire rope condition trolley for proper operation Bridge for proper operation C-hook condition load block Hook and latch condition Radio for proper operation fluid leaks Loose or hanging components Warning devices for proper operation

AWEP-28304
Quick add

Keep feet clear of lift while lowering

AWEP-14586
Quick add

Unit starts automatically

AWE-33123
Quick add

MACHINE UNDER REPAIR DO NOT OPERATE - MÁQUINA EN REPARACIÓN NO UTILIZAR

OWB-4415
Quick add

Compressor starts automatically - El compresor se enciende automáticamente

AWB-7970
Quick add

LOADER SAFETY Know all operation, warning and safety instruction in the operator's manual before operating the loader. 1. Operate loader only from the operator's seat. 2. Carry bucket low during transport for visibility and to avoid overturns. 3. Use wheel ballast and/or rear weight for stability as recommended in the operator's manual. 4. When parking or servicing unit, lower the bucket to the ground, stop engine, and set the parking brake to avoid tractor movement. Failure to follow any of the instruction above can cause serious injury to the operator or other persons in the area. (Replacement manuals are available from your dealer.) - SEGURIDAD DEL CARGADOR Revise todas las instrucciones de operación, advertencias e instrucciones de seguridad en el Manual del Operador antes de operar el cargador. 1. Opere el cargador sólo desde el asiento del operador. 2. Lleve el cubo en una posición baja durante el transporte para facilitar la visibilidad y evitar las volcaduras. 3. Utilice un lastre para ruedas y/o peso posterior para la estabilidad según se recomienda en el Manual del Operador. 4. Cuando estacione o dé servicio a la unidad, baje el cubo hacia el terreno, apague el motor y coloque el freno de estacionamiento para evitar el movimiento del tractor. No seguir alguna de las instrucciones anteriores puede producir una lesión grave al operador o a otras personas en el área. (Su representante de ventas tiene disponibles manuales de reemplazo.)

AWB-14500
Quick add

Moving belts can crush and dismember Do not operate without guards in place - Las cintas en movimiento pueden aplastar y desmembrar No utilizar sin los protectores en su lugar

AWB-4530
Quick add

Machine under repair Do not operate

AWE-4415
Quick add

MACHINE UNDER REPAIR DO NOT OPERATE

OWE-4415
Quick add

Compressor starts automatically

AWE-7970
Quick add

KEEP HANDS AND BODY CLEAR OF MOVING PARTS

OWE-50122
Quick add

TO AVOID SERIOUS INJURY OR DEATH 1. Never exceed Rated Load Capacity of machine and implement as machine could tip over. 2. Operation on hilly or mountainous terrain NOT recommended. 3. Operate machine from operators seat only with seat belt securely fastened. 4. Do NOT carry large objects that can fall into the operators zone. 5. Do NOT allow bystanders in this area while machine is in operation. 6. Lockout power before servicing. 7. Read and understand safety manuals of implement and machine before operating. - PARA EVITAR LESIONES GRAVES O LA MUERTE 1. Nunca exceda la Capacidad de Carga Nominal de la máquina ni de los implementos ya que la máquina puede volcarse. 2. La operación en un terreno accidentado o montañoso NO es recomendable. 3. Opere la máquina sólo desde el asiento del operador con el cinturón de seguridad ajustado en forma segura. 4. NO lleve objetos grandes que puedan caerse en la zona del operador. 5. NO permita la presencia de transeúntes en esta área mientras la máquina está en operación. 6. Desconecte y bloquee la energía antes de dar servicio. 7. Lea y entienda los manuales de seguridad de los implementos y de la máquina antes de la operación.

AWB-14503
Quick add

Do not enter when equipment is operating

AWE-34635
Quick add

Energized Keep away

AWE-30013
Quick add

MOVING BELTS CAN CRUSH AND DISMEMBER DO NOT OPERATE WITHOUT GUARDS IN PLACE

OWEP-4530
Quick add

Don't see what you need?

Call us at 1-800-578-1245 or Email sales@compliancesigns.com.