Fast & accurate
delivery
Hello! Sign in for
Account & orders
0
Cart

ANSI Voltage & Shock Hazard Signs and Labels

Use these ANSI format voltage and shock hazard safety signs and labels to post critical information about electrical safety in the workplace. Notify employees of the dangers of high voltage, overhead power lines, exposed buses and other hazards. Topics include: voltage indications and high voltage warnings for industrial, worksite and agriculture applications.

  • Use these ANSI electrical safety signs to indicate potential shock hazards and high voltage locations

  • Available as surface-mount signs or permanent-adhesive labels in 6 sizes - all made in the USA

  • All our ANSI voltage and shock hazard signs conform to ANSI Z535.1 standards for Safety Color Code

1 - 48 of 821 Signs
Grid List
Signs Ranked by: Popularity |  Language |  Color |  A-Z

Maximum available fault current____amps

AWE-26847
Quick add

Risk of electrical shock from energy stored in capacitors Wait for 5 minutes after shutdown of equipment before servicing

AWE-16452
Quick add

Maximum available fault current____amps

AWEP-26847
Quick add

Electrical Hazard

ADE-28638
Quick add

Underground live wire

ADEP-6250
Quick add

Electrical hazard Authorized personnel only

AWE-25259
Quick add

Electrical hazard Disconnect power before entry

AWE-28576
Quick add

High voltage Keep out

AWE-32580
Quick add

ELECTROCUTION HAZARD Keep all parts of this crane at least 20 feet away from Electrical Power Lines and Equipment

AWE-15150
Quick add

High Voltage Turn power off before servicing - Alto Voltaje Apagar antes de reparar

ADB-3790
Quick add

Capacitor circuit Capacitors can remain energized indefinitely Stand clear of all electrical components within this cabinet until high-voltage power supply and capacitors are properly discharged See operators manual

ADE-29957
Quick add

Risk of electrical shock Can cause injury or death Disconnect all remote electrical power supplies before servicing

AWE-30083
Quick add

Electric fence Do not climb Do not touch

AWE-28394
Quick add

Do not work on this equipment until isolated from both mains and on-site generation Isolate on-site generation at ____ Isolate main at ____

ANE-28608
Quick add

Risk of electrical shock from energy stored in capacitors Wait for 5 minutes after shutdown of equipment before servicing

ACE-16452
Quick add

Electrical hazard Do not touch

AWE-2710
Quick add

Electrical Shock Hazard

AWE-28621
Quick add

HAZARDOUS VOLTAGE INSIDE! Will Shock, Burn or Cause Death Call Electric Power and Light Company if Open or Unlocked

AWE-3570-R
Quick add

Hazardous Voltage Contact may cause electric shock or burn Turn off and lock out power before servicing

AWE-28582
Quick add

Arc Flash and Shock Hazard Appropriate personal protection equipment (PPE) required prior to work on or near energized parts Failure to comply may result in shocks, burns, injury or death

ADEP-28056
Quick add

Electrical Hazard

AWE-28638
Quick add

120V/208V Remove power before opening

AWEP-28587
Quick add

Electrical Equipment Keep out

ADE-9612
Quick add

Area in front of electrical panel must be kept clear for 36 inches - El área frente al panel eléctrico deberá mantenerse despejada en un radio de 36 pulgadas

ADB-1280
Quick add

Electrical panel area Must be kept clear at all times - Área de paneles eléctricos Mantenga despejado en todo momento

ACB-2725
Quick add

Parts of the controller are not de-energized by this switch

AWE-28633
Quick add

Actuation of more than one disconnect is required to de-energize all circuits within this panel

ACE-16456
Quick add

High Voltage

ACE-28593
Quick add

Parts of the controller are not de-energized by this switch

ACE-28633
Quick add

High Voltage

ADE-28580
Quick add

High Voltage Keep away

ADE-3770
Quick add

Electrocution Hazard Death or serious injury will result if operator or machine contacts or is too close to electrical power lines, equipment, or other electrically charged objects Keep clear of truck and load

ADE-18241
Quick add

Electric shock hazard equipment may be powered by multiple sources Lock out all sources before servicing

ADEP-30266
Quick add

Hazardous Voltage Disconnect main power before servicing equipment - Alto Voltaje Desconecte la toma de corriente principal antes de realizar reparaciones

ADB-3567
Quick add

600 DV Solar system in operation

ADE-27018
Quick add

Electric Fence

ACE-28618
Quick add

480 Volts - 480 Voltios

ADB-1070
Quick add

ELECTROCUTION HAZARD Keep all parts of this crane at least 20 feet away from Electrical Power Lines and Equipment

ADE-15150
Quick add

Electrically Classified Area Class 1 Div 1

ANE-28622
Quick add

Electrical equipment Authorized personnel only

ADE-2695
Quick add

Don't see what you need?

Call us at 1-800-578-1245 or Email sales@compliancesigns.com.